There is a chance that your well might have plenty of water, but you are still experiencing water pressure issues. If that is the case, it is more than likely that there is a problem somewhere within the system. The issue of low or no water pressure well is quite common for most wells. The good news is that the problem can be fixed. You only need to run some diagnostics to identify the problem and do the necessary repairs and maintenance. It is always advisable that you let an experienced professional do the job to ensure it does not result in further damages. Some of the common problems to check are highlighted below.

Low Flow from The Well Pump

In most cases, the low water pressure problem usually arises from water pump issues. Some of the causes can be wearing out of the pump due to aging, clogged well screens, broken well pipe, check valve partially stuck, and corroded well pipe, among others. Whichever the problem is, a well expert will be able to figure it out and recommend the appropriate solutions.

Faulty Pressure Switch

Standard systems usually come with a switch that can be used to adjust the pressure settings. Adjusting the pressure upwards is quite okay, but you have to be very careful while doing so. That is because increasing the pressure decreases the pressure tank drawdown. There is a possibility that your pump may be unable to build higher pressure than what is set on the pressure switch. That means that adjusting the pressure upwards may not work. Also, consider inspecting and cleaning the pressure switch to ensure there is no debris or insects present.

Clogged Piping

Identifying clogged piping may be a bit of a challenge and usually requires the expertise of a professional. One easy way that you can try as an amateur is to take out a section of the pile and do a physical inspection. Check whether it is filled with scale, sediment, or orange sludge, all of which can affect your water pressure negatively.

Malfunctioning or Clogged Pressure Regulators

If you have a pressure regulator fitted on the main pipe from the well to your home, it might be the cause of the water pressure problem you are experiencing. The pressure regulators can get filled with sediment and rust, or go bad after being used for many years. Replacing it with a new one should solve the problem.